|
|
SiteScan Web Advanced Monitoring
- Site
monitoring is a critical element of maintaining maximum availability
for your critical operations. Simply put... with SiteScan
Web you can utilize today's Web technology to oversee and
control critical support systems from just about anywhere.
 |
Web-Based
site monitoring, alarm management and trending/analysis
for critical sites in applications including computer
rooms, telecommunications centers, industrial process
control facilities and other locations housing sensitive
electronic systems. |
OpenComms Product Family -
The Liebert OpenComms Product Family is a suite of products
designed to leverage your customer's existing network infrastructure,
enhancing the monitoring capabilities of your distributed
Liebert products. The OpenComms line of products will provide
cost-effective centralized status and alarm monitoring of
your network-enabled Liebert equipment
OpenComms
NIC
 |
Interface
Card for SNMP & Web Interface. |
OpenComms Web Card
 |
The
OpenComms Web Card (formerly named Intellislot) provides
SNMP and web-based management to your UPS. |
OpenComms Nform
 |
A
network communications system that will enable you to
leverage the distributed monitoring capabilities of your
network connected equipment. |
OpenComms EM
 |
Compact
device to monitor temperature, humidity, contact closures
and notify personnel when conditions exceed user-defined
limits. Optional PDU control provides monitoring, notification
and control of Liebert Managed Power Advanced Power Strips. |
Shutdown Products - Liebert's
line of power communications software and hardware products
provides both network enabled and dedicated out-of-band options
for each level of power protection.
MultiLink
 |
UPS
status reporting and automatic orderly shutdown of assigned
computers via free MultiLink software. Suitable for a
single workstation or a network of servers. |
Intellislot Relay Interface Card
 |
A
hot-swappable, Intellislot form-factor card designed to
provide Form C contact closure signals from the UPS, which
can be monitored by an external device for alarm notification. |
Multiport
 |
Multiplexing
device that allows UPS monitoring for multiple computer
systems running MultiLink or other shutdown software. |
IntelliRack
 |
Multiplexing
device that allows a Liebert UPS of any size to communicate
with virtually unlimited number of computer systems running
MultiLink or other shutdown software. |
CommSureô - 60Hz
 |
CommSureô
will manage automatic shutdown of computer systems being
powered by redundant power supplies when used with MultiLink
software. |
Leak Detection - a
wide range of leak detection systems provides fast detection
and location reporting of potentially hazardous fluid leaks.
Direct
Read Panels LDS750 & LDS1000
 |
A
leak detection system provides quick detection and location
reporting of potentially hazardous fluid leaks. Leak detection
systems may stand-alone or communicate with Liebert SiteScan
or a BMS. |
Zone Sensor LT460
 |
A
zone leak detection sensor provides up to one hundred
feet of detection of potentially hazardous fluid leaks. |
Point Sensor LT300 & LT410
 |
A
point leak detection sensor provides detection of potentially
hazardous fluid leaks. |
Leak Detection Cable
 |
A
four-conductor plenum rated cable is used with the LDS750,
LDS1000 and LT460. Each sensing conductor responds to
the presence of a conductive fluid |
Standalone Monitoring Panels - autonomous
microprocessor-controlled modules are available to provide
supervision and control of Liebert equipment, giving you the
ability to monitor up-to-the-second status on system protection.
Information can also be provided to centralized facility management
systems.
Universal
Monitor
 |
The
Universal Monitor is an all-purpose simple to use monitoring
panel. An on-board modem is included as a standard feature
to provide remote monitoring. A built-in LCD user interface
makes the panel self contained and easily accessible. |
TW420 & THW420 Sensors
 |
The
TW420 temperature sensor and THW420 combination temperature/humidity
sensor are wall mounted room sensors. Each sensor is an
ideal solution to provide temperature and humidity inputs
to the Universal Monitor. |
Autochangeover Controller, AC3
 |
The
AC3 autochangeover controller provides switching for up
to three Liebert environmental units, balancing runtime
or switching to a backup unit in a case of primary unit
alarm. |
Autochangeover Controllers, RAC2-8, TELE2
 |
The
RAC2-8 remote autochangeover controller monitors and controls
up to eight environmental units in four separate zones.
The TELE2 remote autochangeover controller monitors and
controls up to two environmental InteleCool units. |
OpenComms EM
 |
Compact
device to monitor temperature, humidity, contact closures
and notify personnel when conditions exceed user-defined
limits. Optional PDU control provides monitoring, notification
and control of Liebert Managed Power Advanced Power Strips. |
Contact Closure Alarm Panels RCM4, RCM8CE, & RCM8DO
 |
Contact
closure monitoring systems display customized alarm indications
at a single location, continuously surveying your most
critical support equipment and instantly alerting you
to alarm conditions. SiteScan compatible. |
SiteNet Integrator and Load Control Module
 |
SNMP
interface allows connection and status reporting of contact
closures, temperatures & humidity inputs, and thermistor
inputs. Rack-mount or desktop design. Optional load control
module provides remote power management. |
Remote Access Panel, Remote Power Monitor Panel (RPMP)
 |
The
RPMP monitors and displays information for any one critical
component within an electrical power system: Switchboard
distribution panels; Diesel generators; UPS systems; Motor
generator systems; and other essential electrical equipment. |
Environmental DO Interface Card
 |
Interface
Card for or up to 16 Discrete Outputs of Status and Alarms. |
|
|
|
